Frequently Asked Questions

Q. How do I select the Leech adhesive that is best for my application?

A. The "Our Products" section of this web site will give you most of the answers you need. You can call us, or go see your local Leech retailer for help in selecting the right adhesive for the job. Also, the actual product packaging itself tells what applications this product is designed for.

Q. Have Leech adhesives been tested?

A. Absolutely. Not only by the test of time, but also by the major Construction and Materials Associations and Government Agencies that monitor construction materials. We manufacture all of our products under strict quality control standards to assure you of the highest quality, most dependable adhesive products available.

Q. What affect does hot or cold weather have on these adhesives?

A. Very little. Take F-26 for example. It exceeds the requirements of the 500 hour ASTM-D-572-72 standards, and provides dependable service in temperatures from -20sF to 140sF. Each of our other products meets or exceeds the standards set for their particular application.

Q. Where can I buy Leech adhesives?

A. You can become a distributor or dealer of our products by contacting us. If you are a contractor or consumer, you can email us or call us for the retailer nearest you.

Q. What adhesive can be used for the installation of plastic tub enclosures?

A. Leech F-13 Construction Adhesive

Q. What product can be used to bond rubber to metal?

A. Leech Super Adhesive Weatherstrip

Q. Can Leech Real Wood Filler be used on outdoor applications?

A. Yes, it is weatherproof when fully cured

Q. What can be used to seal round my home windows?

A. Leech Silicone Rubber Sealant

Q. Will Leech X-30 contact Cement produce a good bond if the cement is still wet?

A. No, the cement has to be dry to the touch and put firmly into place?

Q. What product can be used to reset a stone on rings or jewelry?

A. Leech Rapid Mix Epoxy Cement

Q. What can I use to clean up excess adhesive?

A. Acetone or Mineral Spirits.


	• Our Products • Tap-N-Glue • Frequently Asked Questions • History of Leech • Sales Tools • Contact Us • Home Leech Products • 800-992-9018 PO Box 2147 • Hutchinson, KS 67504 620-669-0145 • fax 620-669-1183		Q. How do I select the Leech adhesive that is best for my application? A. The "Our Products" section of this web site will give you most of the answers you need. You can call us, or go see your local Leech retailer for help in selecting the right adhesive for the job. Also, the actual product packaging itself tells what applications this product is designed for. Q. Have Leech adhesives been tested? A. Absolutely. Not only by the test of time, but also by the major Construction and Materials Associations and Government Agencies that monitor construction materials. We manufacture all of our products under strict quality control standards to assure you of the highest quality, most dependable adhesive products available. Q. What affect does hot or cold weather have on these adhesives? A. Very little. Take F-26 for example. It exceeds the requirements of the 500 hour ASTM-D-572-72 standards, and provides dependable service in temperatures from -20sF to 140sF. Each of our other products meets or exceeds the standards set for their particular application. Q. Where can I buy Leech adhesives? A. You can become a distributor or dealer of our products by contacting us. If you are a contractor or consumer, you can email us or call us for the retailer nearest you. Q. What adhesive can be used for the installation of plastic tub enclosures? A. Leech F-13 Construction Adhesive Q. What product can be used to bond rubber to metal? A. Leech Super Adhesive Weatherstrip Q. Can Leech Real Wood Filler be used on outdoor applications? A. Yes, it is weatherproof when fully cured Q. What can be used to seal round my home windows? A. Leech Silicone Rubber Sealant Q. Will Leech X-30 contact Cement produce a good bond if the cement is still wet? A. No, the cement has to be dry to the touch and put firmly into place? Q. What product can be used to reset a stone on rings or jewelry? A. Leech Rapid Mix Epoxy Cement Q. What can I use to clean up excess adhesive? A. Acetone or Mineral Spirits.